iSGTW - International Science Grid This Week
iSGTW - International Science Grid This Week
Null

Home > iSGTW 13 August 2008 > iSGTW Feature - Almost starting-up the LHC

Feature - (Almost) starting up the LHC: a view from the front lines


A welder works on the interconnection between two of the LHC's superconducting magnet systems, in the LHC tunnel, earlier this year.

Image courtesy of CERN

On Thursday, 8 August, CERN announced that it would make the first attempt to circulate a beam in the Large Hadron Collider (LHC) on 10 September, with the first test scheduled for the weekend of 9 August.

To find out what it is like from the point of view of those actually building the LHC and installing the equipment, iSGTW caught up with Mike Lamont of LHC Machine Operations for a few minutes, just  before workers were about to start the initial steps of a preliminary, low-energy, “pre-startup.”


iSGTW: What are your feelings, after all this time and effort?

Lamont: “At the moment, my general feeling is an overwhelming one of relief, actually. We’ve pulled all the bits together; we’ve got the ring more or less cooled now; we’re underway.”

“We’re up to our necks with the detail—and the devil is in the details—but overall I’m feeling relieved.”


iSGTW: If you had to take a guess, what would you expect the LHC to find?

Lamont: “Well, I’m just on the accelerator end, but I’m thinking the wish list is the Higgs, supersymmetry, and then the more exotic stuff.” (Note: when iSGTW spoke with CERN theoretical physicist John Ellis a few months ago, Ellis said “We could find all kinds of weird and wonderful creatures we haven’t even thought of yet.”)


iSGTW: What do you see as the role of grid computing in all this?

Lamont: “There’s going to be a huge, unimaginable amount of data coming out from this. I’m on the machine side, the operations side, but already I can see that. And even from my vantage point, you also get a real sense of the international aspect of the collaboration–you’ve got the Americans and the Russians and everyone else, sending data from Europe to Taiwan or China for processing. You really get a sense of the international level of the project.”


iSGTW: Where do things stand right now?

Lamont: “This is as exciting as it gets. We’ve got the machine cooled, the access controlled and all the people out. We’re going to start things today for a preliminary test tomorrow, and there’s a pit in your stomach from the excitement.”

(laughs) “This is as exciting as it gets.”

Dan Drollette, iSGTW


Overview: what's involved

Starting up such a machine is not as simple as flipping a switch. Commissioning is a long process that starts with the cooling down of each of the machine’s eight sectors. This is followed by the electrical testing of the 1600 superconducting magnets and their individual powering to nominal operating current. These steps are followed by the powering together of all the circuits of each sector, and then of the eight independent sectors in unison in order to operate as a single machine.

A prime symbol of CERN, the Globe of Science and Innovation, is seen lit up at night. Now used as an  exhibition center, the wooden building was given to CERN in 2004 as a gift from  Switzerland to mark 50 years since the Organization's foundation.

Image courtesy of CERN

By the end of July, this work was approaching completion, with all eight sectors at their operating temperature of 1.9 degrees above absolute zero (-271°C). The next phase in the process is synchronization of the LHC with the Super Proton Synchrotron (SPS) accelerator, which forms the last link in the LHC’s injector chain. Timing between the two machines has to be accurate to within a fraction of a nanosecond.

After the first synchronization, or injection, test on the weekend of 9 August,for the clockwise-circulating LHC beam, the second test will follow over the coming weeks. Tests will continue into September to ensure that the entire machine is ready to accelerate and collide beams at an energy of 5 TeV per beam, the target energy for 2008.

Force majeure notwithstanding, the LHC will see its first circulating beam on 10 September at the injection energy of 450 GeV (0.45 TeV).

Once stable circulating beams have been established, they will be brought into collision, and the final step will be to commission the LHC’s acceleration system to boost the energy to 5 TeV, taking particle physics research to a new frontier.

‘We’re finishing a marathon with a sprint,’ said LHC project leader Lyn Evans. ‘It’s been a long haul, and we’re all eager to get the LHC research programme underway.’

Tags:



Null
 iSGTW 22 December 2010

Feature – Army of Women allies with CaBIG for online longitudinal studies

Special Announcement - iSGTW on Holiday

Video of the Week - Learn about LiDAR

 Announcements

NeHC launches social media

PRACE announces third Tier-0 machine

iRODS 2011 User Group Meeting

Jobs in distributed computing

 Subscribe

Enter your email address to subscribe to iSGTW.

Unsubscribe

 iSGTW Blog Watch

Keep up with the grid’s blogosphere

 Mark your calendar

December 2010

13-18, AGU Fall Meeting

14-16, UCC 2010

17, ICETI 2011 and ICSIT 2011

24, Abstract Submission deadline, EGI User Forum

 

January 2011

11, HPCS 2011 Submission Deadline

11, SPCloud 2011

22, ALENEX11

30 Jan – 3 Feb, ESCC/Internet2

 

February 2011

1 - 4, GlobusWorld '11

2, Lift 11

15 - 16, Cloudscape III


More calendar items . . .

 

FooterINFSOMEuropean CommissionDepartment of EnergyNational¬†Science¬†Foundation RSSHeadlines | Site Map